We have now come to the phase where we dont have much new stuff to show every night. Now it is more about repeating things we have done earlier. Last night we sanded the second hull panel and did some more bulkheads.Sanding with the belt sander is fast, but need a careful hand to not cut too deep. Especially tricky in the areas with a lot of curvature. Sanding a hull panel takes just about 2 hours with the belt sander and 40grit paper.
Unfortunately I have some low spots to fill on this panel. Good thing that we dont lack sanding dust.
2 comments:
Keep it up Rolf, I know how it feels when working like h.. and nothing to present on the blog.
No worries, we are not giving up. Building in a group makes it much easier to keep motivation up than with a solo project.
Post a Comment